Updated November 2026

Learning how to wear Raycon bone conduction headphones correctly comes down to three things: placing the transducers on the cheekbones just in front of your ears, setting the band snugly without pressing hard, and checking that the sound reaches you clearly. Once you have the position right, you get better volume and bass with less leakage, and the headphones stay put during workouts or long listening sessions.

Before You Put Them On

Start by confirming which parts of the band are which. The neckband sits behind your head and across the back of your neck, and the two arms end in small pads that rest against your face. Make sure the device is charged and the Bluetooth connection is active, since it is easier to adjust fit while playing a track you know.

Shopping for one? See our guide: Raycon Bone Conduction Headphones Charger: 6 Best Replacement Cables of 2026.

  • Charge the unit fully if the indicator light is low.
  • Wipe the pads with a dry cloth so they grip your skin better.
  • Remove hats, hair ties or headbands that would sit under the band.

Step-by-Step Placement

  1. Loop the neckband. Hold the headphones with the arms pointing forward and slide the band behind your head so it rests across the base of your skull and the top of your neck.
  2. Position the transducers. Place each arm so the pad sits on the cheekbone just in front of your ear canal, roughly where your jaw moves when you chew. Do not cover the ear canal itself.
  3. Tighten the fit. The band should feel firm enough that the headphones do not slide when you nod your head, but not so tight that you feel pressure on your temples after a few minutes.
  4. Check the sound. Play a track with clear vocals and bass. Shift the pads slightly up, down or forward until the audio sounds full and centered.
  5. Test movement. Turn your head left and right, and if you exercise, jog in place. A secure fit should hold steady without readjusting.

Adjusting for Sound Versus Comfort

If the audio sounds thin, the pads are probably too far forward or too high on the cheek. Moving them slightly back and down often brings up the bass. If you feel soreness, loosen the band a notch and accept a small drop in volume, since a little light leakage is normal with open-ear designs.

Fit Factors That Change Your Experience

Face shape, hair length and whether you wear glasses all affect how the headphones sit. Glass arms can press against the pads, so many wearers find it works better to position the transducers just below the frame. People with longer hair may need to tuck it behind the band for a stable seat.

Situation What to Adjust
Thin audio or weak bass Move pads slightly back and down
Slipping during exercise Tighten the band one notch
Pressure on temples Loosen the band and reposition the pads
Wearing glasses Place pads below the glasses arm

Common Mistakes

  • Pressing the pads hard against the face, which can cause discomfort without improving sound.
  • Placing the transducers over the ear canal rather than in front of it.
  • Wearing the band too loose during runs, leading to constant readjustment.
  • Keeping the volume very high for long periods, since bone conduction still delivers sound you should monitor.

For a broader look at how these devices work and what to watch for, see How to Wear Bone Conduction Headphones: A Step-by-Step Fit Guide and Raycon Bone Conduction Headphones: Fit, Features and How to Choose.

  • Microfiber cleaning cloth: Keeps the transducer pads free of sweat and oil so they grip the skin consistently. View on Amazon
  • Over-ear sport headband for glasses wearers: Helps stabilize the band when glasses arms interfere with placement. View on Amazon
  • Replacement charging cable: A spare cable keeps your fit routine on track when the original gets lost or worn. View on Amazon

FAQ

Do bone conduction headphones have to be worn tight?

No. They need to be snug enough to stay in place, but excessive pressure does not improve sound and can cause soreness over time.

Can I wear Raycon headphones with a hat?

Yes, but the hat brim or band can shift the neckband and change the pad position. Check the fit after putting the hat on and readjust if needed.

Why does my audio sound quieter on one side?

Uneven placement is the usual cause. Compare the two pads on your cheekbones and make them symmetrical, then retest with the same track.

Conclusion

Wearing Raycon bone conduction headphones well means placing the pads on the cheekbones in front of your ears, setting a secure but comfortable band, and fine-tuning position while listening. Take a minute to adjust before exercise or long sessions, and the fit will feel stable and sound clearer. Revisit the steps whenever the headphones start to slip or feel tight.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our headphone tech & types guides, checking product details against manufacturer specifications and owner feedback.