Updated November 2026

Pairing AfterShokz bone conduction headphones takes about a minute once you know the sequence. You put the headphones into pairing mode, select them from your phone or computer’s Bluetooth list, and confirm the voice prompt. If the connection fails, the cause is usually a leftover pairing, low battery, or a second device competing for the signal.

Before You Start

Charge the headphones to at least half before pairing. Low battery can cause the pairing prompt to be missed or the connection to drop right after it forms. Also, make sure the headphones are not still linked to another phone, tablet, or laptop nearby, since that device may keep reconnecting and block the new pairing.

Shopping for one? See our guide: AfterShokz Titanium Wireless Bone Conduction Headphones Review (2026).

Step-by-Step: Pairing Your AfterShokz to a Phone

  1. Power the headphones off completely.
  2. Press and hold the power button until you hear a voice prompt saying the headphones are in pairing mode. Model layouts differ, so check your manual for the exact button and hold time.
  3. On your phone, open Bluetooth settings and turn Bluetooth on.
  4. Select the AfterShokz model name from the list of available devices.
  5. Wait for the confirmation tone or voice prompt that says the connection is made.
  6. Play audio to confirm sound comes through the headphones, and adjust volume with the controls on the headphones themselves.

Pairing With a Computer or a Second Device

Computers and tablets follow the same basic logic, but the menu names differ. On Windows, use Settings, then Bluetooth and devices. On a Mac, use System Settings, then Bluetooth. Put the headphones in pairing mode first, then select them in the list. If you want to switch between two devices, many AfterShokz models support multipoint connection, which lets them stay linked to two sources at once. Check the product manual to confirm whether your specific model supports it.

Forgetting an Old Pairing

If the headphones previously paired with a device that is no longer nearby, remove that device from the Bluetooth list on the headphones’ former host. Then return the headphones to pairing mode and try again. A stale pairing is one of the most common reasons a new connection refuses to form.

Common Mistakes

  • Pressing the power button once instead of holding it until the pairing voice prompt plays.
  • Trying to pair while the headphones are still connected to another nearby device.
  • Attempting to pair with a low battery, which can interrupt the handshake.
  • Keeping the headphones too far from the source device during setup. Stay within a few feet.
  • Assuming a failed pairing means a defect. Restarting both devices often fixes it.
  • Shokz Openrun Pro Premium Bone Conduction Open-ear Sport Headphones: A sport-focused model that suits runners and cyclists who want to hear traffic while listening.View on Amazon
  • Shokz Openrun Se Bone Conduction Headphones: A lighter option for users who want a simpler setup and everyday comfort.View on Amazon

FAQ

Why won’t my AfterShokz headphones show up in Bluetooth settings?

The headphones are probably not in pairing mode. Power them off, then hold the power button until you hear the pairing prompt before searching on your device.

Can AfterShokz connect to two devices at once?

Some models support multipoint pairing, while others connect to only one device at a time. Check your model’s manual or the manufacturer’s specifications.

What should I do if the connection keeps dropping?

Charge the headphones fully, remove old pairings, and keep the source device close during use. If problems continue, contact the manufacturer’s support team.

Conclusion

Put the headphones into pairing mode, select them from your device’s Bluetooth list, and confirm the voice prompt. Most problems come from low battery, old pairings, or competing devices, and each has a quick fix. Keep your model’s manual handy, since button sequences vary between AfterShokz models.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our headphone tech & types guides, checking product details against manufacturer specifications and owner feedback.