Updated November 2026

Putting Raycon bone conduction headphones into pairing mode takes only a few seconds once you know the right button press. This guide walks through entering pairing mode, connecting to a phone or laptop, and clearing up the most common reasons a pair fails to show up on your device.

Before You Start

Pairing problems are often caused by something other than the headphones themselves. Check these basics first so you do not waste time repeating the steps.

  • Charge the headphones for at least 15 minutes, or until the indicator light shows a full charge.
  • Turn Bluetooth on at your phone or laptop and keep the device within a few feet of the headphones.
  • Remove any old entry for the headphones from your device’s Bluetooth list if you have paired them before.

How to Put Raycon Bone Conduction Headphones Into Pairing Mode

Most Raycon bone conduction models enter pairing mode from the off state. Press and hold the power or multifunction button until the indicator light starts flashing, then release. The exact button and the light pattern can vary by model, so check the quick-start sheet packed with your pair or the official Raycon support page for your specific version.

Confirm the Headphones Are Discoverable

A flashing light, often alternating between colors, usually means the headphones are discoverable. If the light stays solid or does not change, the headphones are either already connected to another device or not in pairing mode. Turn them off, wait a few seconds, and repeat the press-and-hold step.

How to Connect to Your Phone or Laptop

  1. Open the Bluetooth settings on your phone or computer.
  2. Wait for the Raycon entry to appear in the list of available devices. This can take 10 to 20 seconds.
  3. Select the Raycon name and accept the connection if prompted.
  4. Play a short audio clip to confirm sound is coming through the headphones.

If the Headphones Do Not Appear

Turn Bluetooth off and back on on your device, then restart the headphone pairing process. Keep other Bluetooth accessories switched off while you pair, since they can crowd the list or intercept the connection.

Fixing Common Pairing Problems

When the headphones stay out of reach, the cause is usually one of a few predictable issues. Work through them in order before assuming a hardware fault.

Symptom Likely cause What to try
No light when pressing the button Low battery Charge for 15 minutes, then retry
Solid light, no pairing Still linked to another device Turn off Bluetooth on the other device or power the headphones off fully
Name appears, then disconnects Stale saved pairing Forget the device on your phone and pair again
Connected but no sound Wrong audio output selected Choose the headphones as the output device in your sound settings

Common Mistakes

  • Holding the button too briefly, which powers the headphones on without entering pairing mode.
  • Trying to pair while the headphones are already connected to a second phone or tablet nearby.
  • Skipping the forget step on a device that still holds an old, broken pairing record.
  • Assuming the charging cable is a pairing tool. Charging alone does not start discovery.
  • A short USB-C or USB-A charging cable kept with your headphones lets you top up the battery quickly before pairing. View on Amazon
  • A soft carrying pouch helps protect the headphones from pocket lint and scratches when you move them between devices. View on Amazon

For more background on the model you own, see Raycon Bone Conduction Headphones: Fit, Features and How to Choose and How Does Bone Conduction Headphones Work? A Plain-English Guide. If you need a replacement cable, Raycon Bone Conduction Headphones Charger: 6 Best Replacement Cables of 2026 covers the options.

FAQ

Why won’t my Raycon headphones show up on my phone?

The headphones may not be in pairing mode, or they may still be linked to another device. Turn off Bluetooth on nearby devices, fully power the headphones off, and enter pairing mode again.

Can I pair Raycon headphones with two devices at once?

Many bone conduction models connect to one device at a time, so you will need to disconnect the first device before pairing a second. Check your model’s manual for multipoint support.

What should I do if the pairing light keeps flashing?

A flashing light means the headphones are still waiting for a connection. Select the Raycon name on your device, or let the headphones time out by powering them off and trying again.

Conclusion

Most Raycon pairing issues come down to entering pairing mode correctly and clearing old connections. Charge the headphones, press and hold the power button until the light flashes, and select the device from your Bluetooth list. If the problem persists, review the official support documentation for your exact model.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our headphone tech & types guides, checking product details against manufacturer specifications and owner feedback.