Updated November 2026
To connect Shokz bone conduction headphones, put the headphones into pairing mode, then select them from your phone’s or computer’s Bluetooth menu. Once paired, the headphones will reconnect automatically whenever they are powered on within range. This guide walks through the process, what to do when pairing fails, and a few habits that keep the connection stable.
Before You Start
Charge the headphones first. Many pairing failures come from a low battery, and the device may not stay in pairing mode long enough to finish the process. Also confirm that your phone, tablet or laptop has Bluetooth turned on and is close to the headphones, ideally within about three feet during setup.
Shopping for one? See our guide: 5 Best Shokz OpenRun Bone Conduction Headphones Compared (2026).
How to Pair Shokz Headphones With Your Phone
The exact button sequence varies slightly between models, so check the manual that came with your pair. The general steps are the same for most Shokz designs:
- Power off the headphones completely.
- Press and hold the power button until you hear a voice prompt or a light flashes, which signals pairing mode.
- On your phone, open Settings and go to Bluetooth.
- Tap the Shokz model name when it appears in the list of available devices.
- Wait for a confirmation tone or a message that the device is connected.
On iPhone, the headphones may also appear as a pop-up card when they enter pairing mode. Accepting that prompt completes the same connection.
How to Connect to a Computer or Second Device
On Windows, open Settings, select Bluetooth & devices, choose Add device, and pick the Shokz model from the list. On a Mac, open System Settings, go to Bluetooth, and click Connect next to the headphones once they appear. Owners often report that laptops show the headphones as an audio output only after pairing, so check the sound output menu if you hear nothing.
Most Shokz models can store more than one device. If you want to switch between two sources, pair both, then use the device’s multipoint feature or disconnect one source before playing audio from the other. Check your specific model’s manual for how multipoint is enabled.
Troubleshooting Connection Problems
If the headphones will not pair, work through these checks in order:
- Delete the old pairing from your phone’s Bluetooth list, then try again.
- Restart the phone and turn Bluetooth off and back on.
- Make sure the headphones are in pairing mode. The indicator light or voice prompt should be active.
- Keep other Bluetooth devices, such as earbuds or a speaker, turned off during setup.
- Charge the headphones for at least 15 minutes and retry.
If audio cuts out during use, move closer to your phone, remove thick metal objects between the two devices, and check whether a nearby Wi-Fi router or microwave is causing interference.
Common Mistakes
- Trying to pair while the headphones are already connected to another device.
- Holding the power button too briefly and missing the pairing mode step.
- Forgetting to select the Shokz model from the Bluetooth list rather than a generic name.
- Assuming one pairing will work across every device without checking the manual.
FAQ
Why won’t my Shokz headphones show up in Bluetooth settings?
The headphones are probably not in pairing mode. Power them off, then press and hold the power button until the light or voice prompt confirms pairing mode before you scan.
Can Shokz headphones connect to two devices at once?
Many Shokz models support multipoint connection, which lets them link to two devices. Confirm this in your model’s manual, since support varies.
Do I have to pair them again after every use?
Usually no. Once paired, the headphones reconnect automatically when turned on near a known device. You only need to re-pair after a reset or if you remove the device from Bluetooth settings.
Conclusion
Pairing Shokz headphones takes only a minute once you know the pairing mode sequence. If the connection fails, clear old pairings, restart your device and charge the headphones before trying again. For setup on a specific model, your manual or the official Shokz support pages will have the exact button steps.
Related reading
- Shokz Bone Conduction Headphones: How to Choose the Right Pair
- Shokz Openrun Se Bone Conduction Headphones: A Step-by-Step Guide for Beginners
- Shokz Openrun Pro Premium Bone Conduction Open-ear Sport Headphones: A Practical Guide (2026)
- Raycon Bone Conduction Headphones: Fit, Features and How to Choose
