Updated November 2026
Shokz bone conduction headphones pair with phones, tablets and laptops over Bluetooth, usually in under a minute. Once paired, most models reconnect automatically to devices you have used before. This guide walks through entering pairing mode, connecting to a new device and fixing the problems that stop a connection from forming.
Before You Start
Charge the headphones first. Low battery can cause the pairing light to behave oddly or the power-on sequence to time out. Also confirm that your phone or computer has Bluetooth turned on and that no other audio device is currently connected to the Shokz set.
Shopping for one? See our guide: 5 Best Shokz OpenRun Bone Conduction Headphones Compared (2026).
- A fully or mostly charged Shokz headset
- A phone, tablet or laptop with Bluetooth enabled
- The original USB charging cable, if the battery is low
- The Shokz app, optional, for firmware updates on supported models
How to Put Shokz Headphones in Pairing Mode
Manufacturers typically specify pairing mode as holding the power button until an indicator light flashes or a voice prompt says it is ready to pair. The exact button press varies slightly by model, so check the quick-start guide that came in the box. Some models enter pairing mode automatically when they are powered on with no paired device nearby. For another angle, check out 25 Best Bone Conduction Headphones.
- Make sure the headphones are powered off.
- Press and hold the power or multifunction button until you see the indicator flash or hear the pairing prompt.
- Keep the headphones within about one meter of the device you are pairing with.
Connecting to Your Phone, Tablet or Laptop
Once the headphones are in pairing mode, the device needs to find them. Open the Bluetooth settings and look for the Shokz model name in the list of available devices. Tap or click it, and wait for the status to change to connected.
- Open Bluetooth settings on your phone (Settings > Bluetooth on iPhone and most Android devices) or on your computer (Settings > Bluetooth & devices on Windows, or System Settings > Bluetooth on macOS).
- Select the Shokz entry from the list of nearby devices.
- Confirm the connection if your device asks for it. Shokz headsets generally do not need a passcode.
- Play a short audio clip to confirm sound is coming through the headset rather than the phone speaker.
Reconnecting to a Device You Already Used
After the first pairing, the headphones usually reconnect on their own when you power them on near a previously paired device. If they do not, turn Bluetooth off and on at the device, then power the headphones off and on again. Removing the old pairing from your device’s Bluetooth list and pairing again often clears a stubborn connection.
Switching Between Two Devices
Some Shokz models support multipoint, which lets them stay connected to two devices at once. Check the manual for your specific model, since not all versions include this feature. Without multipoint, you need to disconnect from one device before the other can take over.
Common Mistakes and Tips
- Forgetting to remove an old pairing from the phone. Remove the stale entry first if the headphones refuse to connect.
- Pairing while the headphones are still in a charging case or cable. Unplug them before entering pairing mode.
- Expecting a connection with the headphones more than a few meters away. Keep them close during setup.
- Ignoring firmware updates. Updates can fix connection drops on supported models.
- Trying to pair while another Bluetooth audio device is still linked. Disconnect the other device first.
Recommended Gear
- A spare USB charging cable helps if the original gets lost, and it keeps the battery topped up before pairing. View on Amazon
- A soft carrying case protects the headset from scratches and keeps the charging cable together. View on Amazon
FAQ
Why won’t my Shokz headphones show up in the Bluetooth list?
The headphones are probably not in pairing mode, or the battery is too low. Charge them, then hold the power button until the indicator flashes before scanning again.
Do Shokz headphones need an app to pair?
No. Pairing happens through your device’s standard Bluetooth settings. The companion app is optional and mainly used for firmware updates and settings on supported models.
What should I do if the headphones connect but there is no sound?
Check that the headset is selected as the audio output on your device, then raise the volume on both the device and the headphones. Reconnecting after a restart usually fixes routing problems.
Conclusion
Pairing a Shokz headset takes only a few steps: charge it, enter pairing mode, and select it from your device’s Bluetooth list. After that first connection, most models reconnect automatically. If problems continue, check the manual for your specific model, or contact the manufacturer’s support team for help with persistent issues.
Related reading
- Shokz Openrun Se Bone Conduction Headphones: A Step-by-Step Guide for Beginners
- Shokz Openrun Pro Premium Bone Conduction Open-ear Sport Headphones: A Practical Guide (2026)
- Shokz Bone Conduction Headphones: How to Choose the Right Pair
- 7 Best Shokz Openswim Pro Waterproof Bone Conduction Headphones (2026): Our Picks
