Updated November 2026
Audiologists use several headphone styles during hearing tests, and each one suits a different job. The main types of headphones in audiology are supra-aural, circumaural, insert earphones and bone-conduction transducers. This guide explains how each works, where clinics typically use it, and what to consider when a specific style matters for accurate results.
Supra-Aural and Circumaural Headphones
Supra-aural headphones rest directly on the outer ear and press against it. They are the traditional style used for pure-tone audiometry, and many clinics still rely on them for standardized air-conduction testing. Because they sit on the ear rather than around it, they are lighter and easier to position, though they can cause discomfort during longer sessions.
Shopping for one? See our guide: 7 Best Type-C to 3.5 Mm Headphone Jack Adapter Picks for 2026.
Circumaural headphones fully enclose the ear with a cushion that sits around the pinna. They reduce outside noise more effectively, which helps when testing in a room that is not fully sound-treated. Clinicians often choose them for speech-in-noise testing or when a patient has difficulty hearing faint tones against background sound.
Insert Earphones and Their Role in Testing
Insert earphones, sometimes called tubephones, seal into the ear canal with a foam or plastic tip. They are the preferred choice for tympanometry, acoustic reflex testing and some otoacoustic emission work, because the sealed canal allows precise control of the sound level reaching the eardrum. Manufacturers specify a tip size that must match the canal, and a poor seal can distort results.
Insert styles also reduce ambient noise without the need for a large cushion. Clinicians often pair them with a checklist for tip fit, since a loose or misplaced tip can lower the presented level by a measurable margin.
Bone-Conduction Transducers
Bone-conduction transducers are not worn like headphones in the usual sense. They are placed on the mastoid bone behind the ear or on the forehead, and they send vibration directly through the skull to the cochlea. Audiologists use them to separate sensorineural from conductive hearing loss: when air-conduction thresholds are poorer than bone-conduction thresholds, the problem likely sits in the outer or middle ear.
Because bone-conduction signals travel through the skull, placement and clamping force matter. Manufacturers specify a consistent force, and even small changes in pressure can shift thresholds, so clinicians keep the device stable throughout each test frequency.
Choosing the Right Style for the Test
Match the headphone type to the test goal. Use supra-aural or circumaural earphones for standard air-conduction audiograms, insert earphones for middle-ear and reflex testing, and bone-conduction transducers whenever you need to determine the site of a loss. Check the room’s noise levels as well, since a noisy space may call for circumaural designs or a sound booth.
- Identify the test: audiogram, speech testing, middle-ear function or bone conduction.
- Confirm the style the test protocol specifies.
- Check fit, seal and placement before each session.
- Calibrate the transducer to the level the clinic’s equipment requires.
- Record the earphone type on the test report so results can be compared later.
| Headphone type | Typical placement | Common clinical use |
|---|---|---|
| Supra-aural | On the outer ear | Pure-tone air-conduction audiometry |
| Circumaural | Around the ear | Speech testing in less controlled rooms |
| Insert | In the ear canal | Tympanometry and acoustic reflexes |
| Bone-conduction | On the mastoid or forehead | Identifying conductive versus sensorineural loss |
Common Mistakes
- Using an insert tip that is the wrong size, which lets sound leak and lowers the presented level.
- Placing bone-conduction transducers with inconsistent pressure between test frequencies.
- Testing in a noisy room without noting it, which can make thresholds look worse than they are.
- Skipping calibration after changing earphone types.
- Leaving the earphone type off the report, which makes follow-up comparisons unreliable.
FAQ
Can a patient use their own consumer headphones for a hearing test?
No. Clinical testing requires calibrated transducers that meet recognized standards, and consumer headphones are not calibrated to those levels. Results from non-calibrated devices are not reliable for diagnosis.
Why do audiologists test both air conduction and bone conduction?
Comparing the two shows where a hearing loss is located. A gap between air and bone thresholds suggests a problem in the outer or middle ear, while matching thresholds point toward the inner ear or auditory nerve.
Are insert earphones more comfortable than over-ear styles?
Many patients find them less bulky, but comfort depends on the individual. Insert tips must seal well, which can feel unfamiliar at first, so clinicians usually explain the process before testing begins.
Conclusion
The main types of headphones in audiology each serve a specific purpose, from standard air-conduction audiograms to bone-conduction testing and middle-ear measurement. Choosing the right style and checking fit before each test keeps results accurate and comparable. If you have concerns about your own hearing, consult a licensed audiologist for a proper evaluation.
