Updated November 2026

The Galaxy S10 bluetooth codec setting controls how your phone compresses audio before sending it to wireless headphones or earbuds. In this guide, you will learn how to find out which codec is active, how to switch it when your Samsung phone offers the option, and what to check if the change doesn’t stick. Most of the work takes about five minutes.

What Codec Your Galaxy S10 Can Use

Bluetooth codecs are the compression formats that move audio between devices. Every Bluetooth device must support SBC, the baseline codec. Better codecs such as AAC and Qualcomm’s aptX family deliver more detail, but only when both your phone and your headphones support them. Samsung’s Galaxy S10 line is generally documented with support for SBC and AAC, with aptX variants depending on the model and region. Check your headphone’s spec sheet before expecting a particular codec.

Shopping for one? See our guide: Galaxy S20 Bluetooth Codec Review: Features and Performance.

If you want a broader comparison before choosing, see Which Bluetooth Codec Is Best? A Clear Guide to Choosing (2026) and What's the Best Bluetooth Audio Codec? SBC vs AAC vs aptX vs LDAC.

How to Check the Active Codec

Android hides the codec menu by default, so you need to enable Developer options first. Samsung’s version of Android follows the same general path.

  1. Open Settings and tap About phone.
  2. Tap Software information, then tap Build number seven times until you see a message that developer mode is enabled.
  3. Go back to the main Settings screen and open Developer options. It may sit under Settings > Developer options or near the bottom of the list.
  4. Scroll to the Bluetooth section and look for Bluetooth Audio Codec. The current selection is shown there.

The codec listed is the one in use only after your headphones are connected. If you see SBC after connecting headphones that support AAC, the phone and headphones have not agreed on a better format.

How to Switch to AAC or aptX

Once you are in the Bluetooth Audio Codec menu, select the codec you want. Samsung’s menu typically lists options such as SBC, AAC, and aptX variants when available. Then follow these steps:

  1. Turn Bluetooth off, then back on, to clear the old link.
  2. Pair or reconnect your headphones.
  3. Return to Developer options and confirm the codec now shows your selection.

Playback quality is also affected by the source app. Streaming services often cap bitrate, so a better codec won’t fix heavily compressed files. Music stored in lossless or high-bitrate formats benefits most from AAC or aptX.

Troubleshooting When the Codec Won’t Change

Some Bluetooth codec problems come from the headphones, not the phone. Owners often report that a codec option appears but reverts to SBC after a reconnect. Common causes include:

  • The headphones support only SBC, or the specific aptX variant your phone is set to use.
  • An old firmware version on the earbuds or headphones.
  • Another paired device, such as a laptop, forcing a different connection profile.

Update the headphone firmware through the manufacturer’s companion app if one exists, and forget any other paired devices while testing. For a similar troubleshooting pattern on another brand, see Xiaomi Bluetooth Codec Problem: Why It Happens and How to Fix It.

Common Mistakes

  • Assuming the menu setting alone confirms the codec. Always check after connecting.
  • Choosing aptX on headphones that do not support it, which falls back silently to SBC.
  • Using a wired cable or adapter and expecting Bluetooth codec changes to apply.
  • Skipping the Bluetooth off/on step, which can leave the old codec active.
  • Expecting higher bitrate codecs to improve compressed streaming audio significantly.
  • Headphones with AAC support: Many Apple and Sony models support AAC, which pairs well with Galaxy phones. View on Amazon
  • Earbuds with aptX support: Qualcomm aptX-compatible earbuds can deliver the enhanced codec when your phone supports it. View on Amazon

FAQ

Does the Galaxy S10 support aptX?

Support depends on the specific model and region. Check the Bluetooth Audio Codec menu in Developer options to see which codecs your phone offers.

Why does my phone show SBC even though my headphones support AAC?

The phone and headphones must both support the same codec, and the connection must be re-established after changing the setting. Turning Bluetooth off and on usually resolves this.

Will changing the codec drain my battery faster?

Differences are generally small for everyday listening, though heavier codecs can use slightly more power. If battery life is a concern, test your setup on a normal listening session.

Conclusion

Enable Developer options, find the Bluetooth Audio Codec menu, and select AAC or aptX if both devices support it. Always confirm the active codec after reconnecting, since headphone firmware and profile conflicts can override your choice. Better codecs help most with high-quality source files.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our headphone tech & types guides, checking product details against manufacturer specifications and owner feedback.