Updated November 2026

Are onn in-ear earbuds waterproof? The short answer depends on the specific model, and the only reliable way to know is the IP rating printed on the product page, packaging, or charging case. This guide shows you how to find that rating, what it protects against, and how to use your earbuds without damaging them.

Step 1: Find the IP Rating on Your Model

Waterproofing is measured with an IP (Ingress Protection) code. The first digit covers solid particles like dust, and the second covers liquids. onn sells several earbud lines, so the rating varies by product. Check the listing specifications or the printed box before assuming water resistance.

Shopping for one? See our guide: Are Onn Wireless Earbuds Waterproof? 5 Best Picks Compared (2026).

If the listing says nothing about water resistance, treat the earbuds as not waterproof. Silence on a spec sheet is not a certification.

Step 2: Understand What the Rating Actually Covers

Each second-digit number describes a specific test. Manufacturers typically specify these conditions, which you should compare against your plans:

  • IPX4: Resists water splashed from any direction. Suitable for sweat during workouts and light rain.
  • IPX5: Resists low-pressure water jets. Handles heavy sweat and rinsing under a tap.
  • IPX7: Survives temporary immersion in water up to about 1 meter for roughly 30 minutes, as specified by the manufacturer.
  • No rating: Keep them away from water entirely.

An “X” in the first position means the dust rating was not tested. Water resistance does not mean the earbuds are rated for swimming, saltwater, hot tubs, or soap.

Step 3: Check the Charging Case Separately

Many people focus on the earbuds and forget the case. The case has its own charging port and hinge, and those openings are where moisture often gets in. Check that the case is closed and the port cover, if it has one, is sealed before you use the earbuds outdoors. A wet case can corrode contacts even when the earbuds themselves are fine.

Step 4: Use and Dry Them Correctly

After exposure to sweat or rain, follow a simple routine:

  1. Wipe the earbuds and case with a dry, soft cloth.
  2. Remove the silicone or foam tips and rinse them only if the manufacturer allows it.
  3. Let everything air dry for several hours with the case open. Do not use a hair dryer or place them on a heater.
  4. Avoid charging until the contacts are fully dry.

Note that rating certifications assume new, undamaged products. Cracks, loose seals, and worn gaskets reduce protection over time.

Common Mistakes to Avoid

  • Assuming any in-ear model is waterproof because it looks sporty.
  • Rinsing earbuds under a faucet or submerging them, even with an IPX rating.
  • Charging wet earbuds or cases, which can cause corrosion.
  • Using soap, alcohol, or harsh cleaners on the mesh grilles or seals.
  • Forgetting that water resistance can decline after drops or repeated heavy sweat.

A few accessories make wet-weather use safer and easier to manage:

  • Soft microfiber cloth: Removes sweat and moisture without scratching the finish or pushing liquid into the grilles. View on Amazon
  • Small silica gel desiccant packs: Help draw moisture out of a charging case that stays damp after a workout. View on Amazon
  • Earbud cleaning brush kit: Clears wax and debris from the speaker mesh, which keeps water from pooling there. View on Amazon

FAQ

Can I wear onn earbuds in the shower?

Only if the product specifications list a rating high enough for direct water exposure and the manufacturer allows it. Most standard in-ear models are not designed for showers, and warm steam and soap can damage seals.

Does IPX4 mean my earbuds are safe in rain?

Light rain and splashes are generally covered by IPX4. Heavy, prolonged downpours are better handled with a higher rating or by keeping the earbuds protected when not in use.

What should I do if my earbuds get wet?

Wipe them dry, let them air dry for several hours, and avoid charging until the contacts are completely dry. If they still fail to work, consult the manufacturer’s support channels.

For more background on reading these codes, see What Do Waterproof Ratings for Earbuds Mean? IP Codes Explained and Are Onn Earbuds Waterproof? IP Rating Explained and What to Know. If you are comparing other brands, Which Earbuds Are Waterproof? IP Ratings and Picks That Hold Up covers several options.

Conclusion

Whether onn in-ear earbuds are waterproof depends on the exact model and its printed IP rating. Check that rating, understand what it covers, and follow basic drying habits. Treat water resistance as protection against sweat and light moisture, not full submersion.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our headphone tech & types guides, checking product details against manufacturer specifications and owner feedback.