Updated November 2026

To change your Bluetooth audio codec on most Android phones, you enable Developer Options, open the Bluetooth audio codec setting, and pick the codec your headphones support. This guide walks through turning on Developer Options, finding the codec menu, choosing a codec that matches your gear, and confirming the change actually took effect.

Step 1: Enable Developer Options

Developer Options is hidden by default. To unlock it, open Settings, go to About phone (on some devices, Software information comes first), and tap Build number seven times. You will see a short message confirming that developer mode is on. Enter your PIN or passcode if prompted.

Shopping for one? See our guide: 4 Best Bluetooth Audio Codec Android Picks for Better Wireless Sound (2026).

Step 2: Find the Bluetooth Audio Codec Setting

Go back to the main Settings menu and open System, then Developer options. Scroll down to the Networking or Bluetooth section and look for Bluetooth audio codec. Menu names vary by manufacturer, so if you do not see it right away, use the search bar at the top of Settings and type “codec.” Some phones also list the setting under Bluetooth settings in the Developer options menu.

Step 3: Choose the Right Codec for Your Headphones

Before you tap anything, check which codecs your headphones or earbuds support. The manufacturer’s spec sheet usually lists this. In general, the options break down like this:

  • SBC: The mandatory baseline codec. Every Bluetooth audio device supports it, but it has the lowest audio quality.
  • AAC: Common on Apple devices and many Android phones. It usually sounds better than SBC at similar bitrates.
  • aptX / aptX HD / aptX Adaptive: Qualcomm codecs that need support on both the phone and the headphones. aptX Adaptive adjusts its bitrate to the connection.
  • LDAC: A Sony codec that can carry high-resolution audio when both devices support it.
  • LC3: A newer, efficient codec introduced with Bluetooth LE Audio. Support is still spreading.

If your headphones support a higher-quality codec, select it. If the connection drops or stutters, switch back to AAC or SBC, since a stable link often beats a theoretically better codec. For a broader comparison, see Bluetooth Audio Codec Comparison: SBC, AAC, aptX, LDAC and LC3 (2026).

Step 4: Apply and Verify the Change

Tap the codec you want, then disconnect and reconnect your headphones. Codec changes often do not apply to an active connection. To confirm, return to the same menu and check which codec is marked as active. Some phones show it on the Bluetooth device details screen instead. If the setting keeps reverting or stays greyed out, see Bluetooth Audio Codec Greyed Out? 6 Fixes That Work (2026).

Your headphones support Pick on Android Why
Only SBC SBC It is the only option that works
SBC and AAC AAC Better clarity at similar bitrates
aptX or aptX Adaptive aptX / aptX Adaptive Better quality, lower latency for video
LDAC LDAC Highest bitrate, if the connection is stable

Common Mistakes

  • Changing the codec without reconnecting the headphones.
  • Assuming a higher-quality codec is always better. Interference can cause dropouts on high-bitrate codecs.
  • Choosing a codec your headphones do not list. The phone may fall back to SBC without telling you.
  • Forgetting that codec menus differ by manufacturer, so the path may vary on your phone.
  • Leaving Developer Options on indefinitely without need. It is safe, but avoid changing advanced settings you do not understand.

A codec-capable pair of headphones is the main requirement. Look for models that list aptX, LDAC or AAC support on the box or spec sheet. A USB-C or wired headphone cable is also useful for troubleshooting, since it bypasses Bluetooth entirely.

  • Sony WH-1000XM5 headphones: support LDAC on compatible Android phones. View on Amazon
  • Qualcomm aptX-compatible earbuds: check the listing for aptX support before buying. View on Amazon

FAQ

Why don’t I see the Bluetooth audio codec option?

Your phone may not expose the setting, or it may be under a different menu name. Use the Settings search bar and try “codec” or “LDAC.” Some carrier-locked or budget devices hide it entirely.

Will changing the codec drain my battery faster?

It can. Higher-bitrate codecs like LDAC generally require more data transfer, which can increase power use slightly. The effect varies by device.

Do I need to change the codec on every device?

The setting is per phone, but the active codec applies to each connected Bluetooth device. Check it again whenever you pair new headphones.

Conclusion

Enable Developer Options, open the Bluetooth audio codec menu, and select the best codec your headphones support. Reconnect the device and confirm the active codec before judging the sound. If a higher-quality codec causes problems, fall back to AAC or SBC for a more stable connection.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our headphone tech & types guides, checking product details against manufacturer specifications and owner feedback.