Updated November 2026

Bone conduction headphones can work with earplugs, but the result depends on what the earplug does. Bone conduction headphones send sound through your cheekbones rather than your ear canal, so a plug that seals the canal won’t block the audio. The real issues are comfort, fit and how much outside noise you still hear, and you can manage all three with a few adjustments.

How Bone Conduction and Earplugs Interact

Bone conduction transducers rest on the cheek just in front of the ear and vibrate the bone. The sound reaches your inner ear through that vibration, so the ear canal is not part of the signal path. That is why open-ear designs leave your canal clear for ambient sound.

Shopping for one? See our guide: 7 Best Bone Conduction Headphones Mic Picks for Work Calls and Driving (2026).

An earplug does the opposite. It physically blocks the canal to reduce noise. When you combine them, you get two separate effects: the earplug cuts outside sound, and the bone conduction unit still delivers audio through the bone. For a deeper look at the mechanism, see How Does Bone Conduction Headphones Work? A Plain-English Guide.

Step-by-Step: Wearing Both Comfortably

  1. Insert the earplug first. Roll foam plugs into a thin cylinder, push them in, and hold for about 20 to 30 seconds while they expand.
  2. Position the bone conduction headband so the transducers sit on the cheek, just forward of the ear opening, without pressing on the ear itself.
  3. Check the seal and pressure. The headband should feel snug but not clamp the earplug, which can push it deeper or loosen it.
  4. Play a test track at moderate volume. Adjust the transducer position until the audio sounds clear and balanced.
  5. Remove both together when you finish, pulling the earplug out slowly to avoid discomfort.

Factors That Affect the Combination

Several details decide whether the pairing works well for you.

Factor What to check
Earplug type Soft foam or silicone plugs with a low profile are less likely to interfere with the headband.
Headband pressure Too much pressure can make the earplug feel pushed inward or cause ear fatigue.
Transducer placement Slight shifts forward or back can change volume and bass response, especially with a plug sealing the canal.
Ear canal size Smaller canals may need a smaller plug size to avoid irritation.

Some owners report that a plug changes how their own voice sounds, a pattern often called occlusion. This is a normal effect of sealing the canal, not a fault in the headphones.

Safety and Hearing Considerations

Using earplugs with bone conduction headphones can reduce how loud you need to set the volume, which may help protect your hearing. Keep the volume moderate anyway. Plugs can make you less aware of traffic or other hazards, so avoid this combination while cycling or walking near roads. If you notice ear pain, pressure, or ringing that persists, stop use and consult a doctor or audiologist.

Tips and Common Mistakes

  • Don’t push foam plugs in too far, as deep insertion can cause discomfort and make removal harder.
  • Avoid pressing the transducers hard against the plug area, which can change the fit and feel.
  • Re-seat the headband after putting in the earplugs, since the headband may have shifted.
  • Test the setup in a quiet room before wearing it outdoors or while exercising.
  • Replace worn foam earplugs regularly, since compressed foam expands less and seals poorly.

Soft foam earplugs are a common choice for this combination because they compress and seal without much bulk. View on Amazon

Silicone earplugs with a flexible tip can suit people who find foam uncomfortable or who want reusable plugs. View on Amazon

A bone conduction headband with a secure, adjustable fit makes it easier to keep the transducers in place with a plug in the ear. View on Amazon

FAQ

Will earplugs block the sound from bone conduction headphones?

No. Bone conduction sends audio through the cheekbone, so a plug in the ear canal does not stop the signal. The plug does reduce outside noise, which is the main effect you will notice.

Can I wear earplugs with bone conduction headphones while running?

You can, but be cautious. Plugs cut outside noise, so you may miss traffic or other people approaching. Many runners prefer open-ear use outdoors for that reason.

Why does my voice sound strange when I wear both?

Sealing the ear canal makes your own voice resonate more inside your head, a effect called occlusion. It is normal and often lessens as your ears adjust.

Conclusion

Bone conduction headphones and earplugs can be worn together because the audio travels through bone, not the ear canal. Focus on a low-profile plug, gentle headband pressure, and a moderate volume. If discomfort continues, consult a doctor or audiologist.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our headphone tech & types guides, checking product details against manufacturer specifications and owner feedback.