Updated November 2026

If you are unable to change Bluetooth codec on Android, the cause is usually one of three things: Developer options are switched off, the phone or headphones only support one codec, or the codec menu is stuck on a fixed setting. This guide walks through each cause in order, so you can find the one affecting your device and fix it without resetting anything.

Confirm Your Phone and Headphones Support Multiple Codecs

Android only lets you pick codecs that both devices share. Your headphones might support SBC and AAC, while your phone supports SBC, AAC, aptX and LDAC. In that case, the best shared option is AAC, and no other codec will appear as a choice. Check the specifications printed on your headphone box or in the manufacturer’s support page. If the headphones list only SBC or AAC, the menu will never offer aptX or LDAC, regardless of your settings.

Shopping for one? See our guide: 4 Best Bluetooth Audio Codec Android Picks for Better Wireless Sound (2026).

Turn On Developer Options

The Bluetooth codec selector sits inside Developer options, which is hidden by default. To enable it:

  1. Open Settings and tap About phone.
  2. Tap Build number seven times until you see a message saying you are now a developer.
  3. Go back to Settings, then open System and Developer options. On some Samsung and Pixel models, it appears directly in the main Settings list.
  4. Scroll to the Networking section and tap Bluetooth Audio Codec.

If the Codec Menu Is Greyed Out

Some manufacturers lock this menu when a codec is forced by a connected accessory, such as a headset that uses a proprietary profile. Disconnect the headphones, reconnect them, and check again. If the menu stays locked, the device is probably controlling codec selection itself, and you will need the manufacturer’s companion app to change it.

Reset the Bluetooth Connection Properly

A stale pairing can keep the old codec active. Go to Settings, then Connected devices, tap the gear icon next to your headphones, and choose Forget. Put the headphones back into pairing mode and reconnect. Then return to the codec menu and select your preferred option.

Restart Both Devices and Update Software

Codec negotiation happens at connection time, so a restart often clears a stuck setting. Power off the phone and the headphones, wait about 30 seconds, and power them back on. Also check for system updates under Settings, then System, then System update. Headphone firmware updates, usually provided through the manufacturer’s app, can also add or fix codec support.

Common Mistakes

  • Assuming the phone is the only factor. The headphones set the ceiling for what codecs are available.
  • Choosing LDAC or aptX on a connection that drops out. Lower-bitrate codecs like SBC or AAC can be more stable in crowded wireless environments.
  • Changing the codec while audio is playing. Some devices only apply the change after playback stops or the connection restarts.
  • Expecting third-party apps to override a locked menu. Most cannot bypass a codec fixed by the hardware.

FAQ

Why does my Android only show SBC in the codec list?

Your headphones probably support only SBC, or the phone is limited by the Bluetooth stack in its software. Check the headphone specifications first, then confirm that your phone’s software is up to date.

Can I change the codec without Developer options?

On most Android phones, no. Some manufacturers place the setting in a companion app or a hidden service menu, but Developer options is the standard location.

Will changing the codec drain my battery faster?

It can. Higher-bitrate codecs like LDAC transmit more data, which may use slightly more power on both devices. The difference is usually small, but noticeable on long listening sessions.

Headphones that explicitly list aptX, LDAC or AAC support in their specifications are the most reliable way to get a choice of codecs on Android. Look for models whose manufacturers publish a companion app with codec controls.

  • Sony WH-1000XM5 headphones: a widely used over-ear model that supports LDAC on compatible Android phones. View on Amazon
  • Qualcomm-based aptX earbuds, such as the Samsung Galaxy Buds2 Pro: a common choice for Android users who want a second codec option beyond SBC. View on Amazon

Conclusion

Most cases of being unable to change Bluetooth codec on Android come down to Developer options being hidden, mismatched device support, or a stuck connection. Check your headphone specifications first, enable Developer options, then reset the pairing if the menu still doesn’t respond. For a full walkthrough of the codec menu, see How to Change Bluetooth Codec Android: Step-by-Step Guide (2026).

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our headphone tech & types guides, checking product details against manufacturer specifications and owner feedback.