Updated November 2026
The bluetooth audio LDAC codec is Sony’s high-resolution wireless audio format, and it can carry far more data than the standard SBC codec. This guide shows you how to confirm that your phone and headphones both support LDAC, switch to it, and check that it is really active. You will also see the settings that most often block it.
What LDAC Does and What You Need
LDAC is a codec, which is the method used to compress audio before it is sent over Bluetooth and decompressed on the receiving end. Sony developed it, and it can transmit up to 990 kbps at its highest quality mode, compared with about 328 kbps for standard SBC at its usual setting. Both devices must support LDAC for it to work. A phone that supports it will not help if your earbuds only offer SBC or AAC.
Shopping for one? See our guide: Bluetooth Transmitter LDAC Codec: 8 Best Picks for Hi-Res Audio (2026).
Step-by-Step: Confirm Support on Both Devices
- Check your headphones or earbuds. Look in the product specifications for “LDAC.” Manufacturers list supported codecs on their spec pages.
- Check your phone or source device. On Android, LDAC support varies by manufacturer and model, so look for it in the audio or Bluetooth section of the spec sheet.
- Pair the devices and open the Bluetooth codec setting. On many Android phones this is under Developer options, labeled “Bluetooth Audio Codec.”
- Select LDAC from the list. If you see it grayed out, the phone or headphones may not support it, or another codec is locked in.
- Reconnect the headphones after changing the setting so the new codec takes effect.
Choosing the Right LDAC Quality Mode
Many LDAC implementations offer quality modes such as “Best quality,” “Balanced,” and “Connection priority.” The top mode gives the highest bitrate but needs a stable link. Dropouts or stuttering usually mean the device has fallen back to a lower bitrate, or that the connection is too weak for the chosen mode.
| Mode | Typical use | What to expect |
|---|---|---|
| Best quality | Seated listening at home, close to the source | Highest bitrate, more sensitive to interference |
| Balanced | General listening with some movement | Good blend of detail and stability |
| Connection priority | Walking, transit, crowded wireless areas | Lower bitrate, fewer dropouts |
Verifying LDAC Is Active
Once connected, check the codec the phone reports rather than assuming it switched. Some apps and Bluetooth menus show the active codec directly. If your device doesn’t display it, test by changing the quality mode and listening for differences in stability. You can also review the bluetooth audio ldac codec details in our guide on Bluetooth Audio LDAC Codec Playback Quality: How to Get the Most Out of It, which covers what to expect once it’s running.
Common Problems and Fixes
If LDAC won’t stay selected, the setting is often overridden by a connection to another device or by the phone reverting to SBC after a reconnect. The article Bluetooth Audio LDAC Codec Playback Quality Greyed Out: 6 Fixes walks through the most common causes. For Windows PCs, the process differs, so see Windows 11 Bluetooth Codec: How to Check and Switch to aptX or LDAC.
Comparing LDAC With Other Codecs
LDAC is not always the right choice. It uses more bandwidth than AAC or aptX, so it can be less stable in crowded radio environments. If you mainly use calls or listen to compressed streaming audio, the difference may be hard to hear. Our overview Bluetooth Codecs Explained: SBC, AAC, aptX, LDAC, LC3 compares these tradeoffs side by side, and Is LDAC the Best Bluetooth Codec? Features, Limits and Verdict looks at where it falls short.
Recommended gear
A Bluetooth transmitter that supports LDAC is useful if your headphones have no built-in support but accept a plug-in source, since it adds the codec to devices that lack it. Try searching for a product from this category: View on Amazon.
Headphones that list LDAC in their specifications are the simplest path to the codec on a supported phone. Look for models that name it directly: View on Amazon.
Tips
- Keep the phone and headphones close and unobstructed when using the highest quality mode.
- Turn off other Bluetooth connections that compete for bandwidth.
- Use a high-bitrate source file, since LDAC cannot restore detail that was lost before encoding.
- Update the phone and headphone firmware, which sometimes fixes codec negotiation issues.
- Re-check the codec after a restart, because some devices reset to SBC.
FAQ
Does LDAC improve sound on every device?
No. You only get the benefit when both the source and the headphones support LDAC and the connection is stable. Otherwise the audio falls back to a standard codec.
Why does LDAC keep switching to SBC?
The devices may renegotiate the connection when the signal weakens or when you reconnect. Selecting a more stable mode and keeping devices close together usually helps.
Is LDAC the same as aptX?
No. They are separate codecs from different developers, and each supports different devices. Some headphones support both, while others support only one.
Conclusion
To use the bluetooth audio LDAC codec, confirm support on both devices, select LDAC in the codec settings, and verify it is active after reconnecting. Choose a quality mode that matches how you listen, since the highest setting needs a strong, steady link. If problems persist, consult the device manufacturer’s support documentation for firmware and settings specific to your model.
