Updated November 2026

To change the Bluetooth audio codec on most Android phones, you open Developer Options, pick a codec under “Bluetooth Audio Codec,” and then reconnect your headphones so the new setting takes effect. You can also use a codec-switching app if your phone hides the option. This guide walks through both methods, shows you how to confirm the active codec, and explains what to do when the choice you want does not appear.

Before You Start: Check What Your Headphones Support

A codec is a shared language between your phone and your headphones. If your headphones do not support a codec, your phone cannot use it, no matter what the menu says. Check the specifications printed on the product page or in the manual for codecs such as SBC, AAC, aptX, aptX HD, or LDAC. SBC is the baseline codec every Bluetooth audio device must support. Anything beyond that is optional, so confirm before you spend time hunting for settings.

Shopping for one? See our guide: 4 Best Bluetooth Audio Codec Android Picks for Better Wireless Sound (2026).

For a plain-language overview of how these codecs differ, see What's the Best Bluetooth Audio Codec? SBC vs AAC vs aptX vs LDAC.

Method 1: Change the Codec in Developer Options

This is the built-in route and works on most stock and near-stock Android builds. Menu names vary a little by manufacturer, but the steps are similar:

  1. Open Settings and go to About phone.
  2. Tap Build number seven times until you see a message that Developer Options is enabled.
  3. Go back to System and open Developer options.
  4. Scroll to the Networking section and tap Bluetooth Audio Codec.
  5. Select the codec you want, such as LDAC or aptX HD.
  6. Disconnect and reconnect your headphones. The codec change does not apply to an active connection until you do this.

Method 2: Use a Codec-Switching App

Some phones, particularly certain Samsung and budget models, do not expose the codec setting. In that case, a third-party app can help. Look for apps that request Bluetooth permissions and clearly state which codecs they support. Install only from a trusted store, read recent user reviews for compatibility problems on your phone model, and check that the app lists your headphones’ codec before you buy any paid version. Our overview of Bluetooth Codec Changer App: How to Switch Codecs on Android (Step-by-Step) covers setup in more detail.

Confirm Which Codec Is Actually Active

Selecting a codec does not always mean your headphones are using it. The phone may fall back to SBC if the other side cannot negotiate the codec you chose. To check:

  • Look at the Bluetooth Audio Codec entry in Developer Options. Some builds show the active codec there.
  • Use a codec-info app that reports the current connection.
  • If the codec you selected reverts after reconnecting, the headphones or the phone likely do not share support for it.
Codec Typical use Common requirement
SBC Universal fallback Supported by all Bluetooth audio devices
AAC Apple devices and many Android phones Headphones must list AAC support
aptX / aptX HD Android devices with Qualcomm chips Both phone and headphones must support it
LDAC High-resolution streaming on Android Headphones and phone both need LDAC

Common Mistakes and Tips

  • Forgetting to reconnect after changing the codec. The new setting usually waits for a fresh connection.
  • Choosing a high-bitrate codec on a weak signal. Dropouts are more likely when you are far from the phone or behind walls, so SBC or AAC may sound more stable in those conditions.
  • Assuming the app or menu proves the codec is in use. Verify the active connection.
  • Turning on Developer Options and forgetting it. You can leave it on without harm, but turn it off if you do not need it.
  • Expecting a codec to fix a poor source. A compressed streaming file will not sound better just because the codec is higher quality.

If your phone lacks a codec menu, a dedicated Bluetooth receiver or transmitter can add codec support to older headphones. Look for a unit that names the codecs it supports in its listing. View on Amazon

For wired listening when Bluetooth is not an option, a USB-C to 3.5mm adapter with a built-in DAC can give you more control over the signal path. View on Amazon

FAQ

Why does my Android phone not show a Bluetooth audio codec option?

Some manufacturers hide the setting or remove it from Developer Options. A codec-switching app or a Bluetooth receiver may be the workaround.

Do I need to restart my phone after changing the codec?

Usually no. Disconnecting and reconnecting the headphones is normally enough to apply the change.

Will a higher-quality codec always sound better?

Not always. A higher-quality codec can help with high-resolution sources, but connection stability and the quality of the audio file matter just as much.

Conclusion

Changing the Bluetooth audio codec on Android comes down to enabling Developer Options or using a trusted app, selecting a codec both devices support, and reconnecting. Always verify the active codec afterward. If the setting keeps reverting or dropping out, compare your options in Can't Change Bluetooth Audio Codec Android? 6 Fixes That Work.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our headphone tech & types guides, checking product details against manufacturer specifications and owner feedback.