Updated November 2026
To check which Bluetooth codec your Android phone is using, you can open the Developer options menu and look at the “Bluetooth audio codec” setting, which shows the active codec for your current connection. This guide walks through enabling Developer options, reading the codec status, and confirming the result with a second method. It takes about two minutes once you know where to look.
Why the Active Codec Matters
A Bluetooth codec is the compression format your phone uses to send audio to your headphones or speaker. The default on most Android phones is SBC, which works with every Bluetooth device but delivers the lowest audio quality. If your headphones support AAC, aptX, or LDAC, your phone can use one of those instead, but only when both devices agree on it. Checking the active codec tells you whether that negotiation actually happened.
Shopping for one? See our guide: Android Check Bluetooth Codec: aptX vs LDAC – Which Should You Choose? (2026).
Step 1: Enable Developer Options
Developer options is hidden by default. To turn it on:
- Open Settings and tap About phone.
- Find Build number (it may be under Software information on some Samsung models).
- Tap it seven times until you see a message saying you are now a developer.
Menu names vary slightly by manufacturer, so search the Settings app for “Build number” if you cannot find it. How to Check Thermostat Wiring Compatibility goes further into this.
Step 2: Read the Active Codec Setting
Go back to Settings, then open System and Developer options. Scroll down to the Networking or Bluetooth section and find Bluetooth audio codec. The current selection is shown on that line. Your headphones must be connected while you do this, or the field may read as a default or unavailable value.
What You Might See
| Displayed value | What it means |
|---|---|
| SBC | Baseline codec; works everywhere but lowest quality |
| AAC | Common on Apple devices and many Android phones |
| aptX / aptX HD | Qualcomm codec; needs support on both ends |
| LDAC | Sony codec for high-resolution streaming |
| Not available | Headphones are disconnected or the phone cannot read the link |
Step 3: Confirm With a Second Method
Developer options shows the codec your phone has selected, but the headphones may not accept it. Some manufacturers document which codecs their earbuds support, so compare the list against your phone’s options. Where the phone shows a codec the headphones lack, it usually falls back to SBC without warning.
You can also check the Bluetooth settings page, where some devices show the codec in the connection details. Samsung users can find related controls in their own Bluetooth audio menu, which is covered in more depth in Bluetooth Audio Codec Samsung: How to Check and Switch Codecs on Galaxy Phones.
Checklist Before You Start
- Headphones are paired and actively connected.
- Developer options is enabled.
- Your phone and headphones are both recent enough to support the codec you want.
- Bluetooth is not connected to a second device at the same time.
Common Mistakes
- Checking while disconnected. The codec only exists during an active link, so connect first.
- Assuming the top codec is in use. A phone can list LDAC while the headphones negotiate SBC.
- Ignoring the device model. Some phone series add or remove codecs by region and software version.
- Forgetting to switch after a change. If you select a different codec, reconnect the headphones and check again.
Recommended gear
A USB-C to 3.5mm adapter helps you test wired audio against Bluetooth output when you want to compare sound quality. View on Amazon
A Bluetooth audio receiver with a dedicated codec menu can help you test codecs on a non-phone source. View on Amazon
FAQ
Why does my Android phone show SBC when I expected AAC?
Your headphones may not support AAC, or the phone may have fallen back to SBC during connection. Reconnect the headphones and check again to see if the codec changes.
Can I change the codec from Developer options?
Yes, on many Android phones you can select a different codec from the same menu. Your headphones must support the codec you choose, or the connection will default to SBC.
Do I need root access to check the codec?
No. Developer options exposes the active codec on standard, unrooted Android phones, so no special software is required.
Conclusion
Enable Developer options, connect your headphones, and read the Bluetooth audio codec line to see what your phone is actually using. Compare that result against your headphones’ supported codecs to catch silent fallbacks. If you find SBC when you expected something better, see Bluetooth Codec Changer App: How to Switch Codecs on Android (Step-by-Step) for next steps.
Related reading
- Windows 11 Bluetooth Codec: How to Check and Switch to aptX or LDAC
- Windows 10 Aac Bluetooth Codec: How to Check and Use AAC on Windows 10
- Steam Deck Bluetooth Audio Codec: How to Check and Switch It (2026)
- Sonos Roam Bluetooth Codec: What It Supports and How to Check
- Powerbeats Pro Bluetooth Codec: What It Supports and How to Check
