Updated November 2026

Are LetsFit earbuds waterproof? The short answer is that it depends on the specific model, and the only reliable way to know is to check the IP rating printed in the product specifications. This guide shows you where to find that rating, what the code means in practical terms, and how to use your earbuds without damaging them.

Step 1: Find the IP Rating on Your Model

LetsFit sells several earbud lines, and water resistance varies between them. Start by checking the product page or box for an “IP” code followed by two digits, such as IPX4, IPX5, or IPX7. If the listing says only “sweat resistant” or does not mention an IP rating at all, treat the earbuds as splash resistant only. For a full breakdown of how these codes work, see What Do Waterproof Ratings for Earbuds Mean? IP Codes Explained.

Shopping for one? See our guide: 7 Best Waterproof Earbuds for Shower Use in 2026.

Step 2: Understand What the Rating Covers

An IP rating has two digits. The first digit covers dust and solid particles and is usually an X for earbuds, meaning it was not tested. The second digit covers liquid. Common levels for sport earbuds are:

  • IPX4: resists sweat and light splashes from any direction.
  • IPX5: resists water jets from a nozzle, such as a rinse under a tap.
  • IPX7: resists temporary immersion in about 1 meter of still water for roughly 30 minutes, according to the standard test conditions.

Manufacturers test under controlled conditions, so an IPX7 rating does not promise safety in chlorinated pools, saltwater, or hot water. Read more about what IPX7 means in practice in Ipx7 Waterproof Rating Earbuds: What IPX7 Means and How to Choose (2026).

Step 3: Match the Rating to How You Plan to Use Them

Use the table below to decide whether your model fits your activity.

Activity Minimum rating to look for Notes
Running, gym sessions IPX4 Handles sweat well; avoid rinsing under a tap.
Rainy outdoor runs IPX4 or IPX5 Brief rain exposure is generally fine.
Rinsing after a workout IPX5 or higher Gentle water jets only, not pressurized spray.
Brief submersion IPX7 or higher Still water only, and dry promptly afterward.
Swimming Not recommended on most models Check the manufacturer’s guidance first.

If you need protection for swimming or diving, look at dedicated products like those in Swimbuds Sport Waterproof Earbuds: Setup, Fit, and Use Guide (2026), since most standard earbuds are not designed for that use.

Step 4: Protect the Seal and Dry Them Properly

Water resistance depends on the condition of the seals and charging contacts. After any exposure, follow these steps:

  1. Wipe the earbuds and case with a soft, dry cloth.
  2. Shake out water from the speaker mesh and let them air dry for several hours.
  3. Check that the charging contacts are dry before placing them in the case.
  4. Do not charge the earbuds while they are still wet.

Avoid using compressed air or sharp objects near the grilles, since these can push debris into the seals.

Common Mistakes

  • Assuming all LetsFit models share the same rating.
  • Charging the case while the earbuds or contacts are wet.
  • Wearing them in a hot shower or sauna, where heat and steam can stress components.
  • Ignoring a damaged or missing rubber gasket on the case.
  • Treating water resistance as permanent; seals wear down over time.

A few simple accessories help keep your earbuds dry and in good condition.

  • A microfiber cloth lets you wipe away sweat and droplets without scratching the surface. View on Amazon
  • A small silicone ear hook or sport fin set keeps the earbuds seated during workouts, reducing the chance of them being knocked into water. View on Amazon
  • A soft pouch or case protects the earbuds from grit and moisture when you carry them in a bag. View on Amazon

FAQ

Can LetsFit earbuds go in the shower?

Only if the model has a high enough rating and you use them gently. Most owners avoid showers because hot water and steam can stress the seals. Check the IP rating and the manufacturer’s guidance before trying it.

Are LetsFit earbuds safe to use in the rain?

Models rated IPX4 or higher generally handle light rain. Dry them promptly afterward and avoid charging until they are fully dry.

What should I do if my LetsFit earbuds get wet?

Wipe them dry, let them air out for several hours, and make sure the charging contacts are dry before charging. If they stop working or the charging case shows corrosion, contact LetsFit support or a qualified repair service.

Conclusion

Whether LetsFit earbuds are waterproof depends on the model’s IP rating, which you can find in its specifications. Match that rating to your activity, and treat water resistance as a limit that weakens with age and rough handling. Dry your earbuds carefully after every exposure to keep them working longer.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our headphone tech & types guides, checking product details against manufacturer specifications and owner feedback.