Updated November 2026

To select a Bluetooth audio codec, you need to know what your source device and headphones both support, then pick the highest-quality codec they share. This guide walks you through checking support, choosing the right codec for your listening goals, and switching it in common settings menus. Most of the work takes about five minutes.

Step 1: Check What Your Headphones Support

Start with the spec sheet for your headphones or earbuds. Manufacturers usually list supported codecs under “audio” or “compatibility.” Look for SBC, AAC, aptX, aptX HD, aptX Adaptive, LDAC, or LC3. SBC is mandatory for every Bluetooth audio device, so it will always appear. Anything beyond that is optional, and a codec missing from the spec sheet generally cannot be forced to work.

Shopping for one? See our guide: 4 Best Bluetooth Audio Codec Android Picks for Better Wireless Sound (2026).

Step 2: Check What Your Phone or Computer Supports

Your source device sets the ceiling. An iPhone supports AAC and not aptX, while many Android phones support aptX and LDAC. Windows PCs typically support SBC and AAC by default, and some add aptX through the audio driver. Because the connection uses whichever codec both ends can handle, a high-end headphone paired with a phone that only offers SBC will play at SBC quality.

Step 3: Match the Codec to Your Priorities

Once you know the shared options, choose based on what matters most to you:

  • Sound quality for music: LDAC or aptX HD, if both devices support them.
  • Low delay for video or gaming: aptX Adaptive or aptX Low Latency, which trade some bitrate for a shorter delay.
  • Apple ecosystem reliability: AAC, which iPhones and Macs handle well.
  • Maximum compatibility: SBC, which every device accepts, though at the lowest quality.

Step 4: Switch the Codec in Your Device Settings

On Android

Open Settings, go to Developer options, and find “Bluetooth Audio Codec.” Developer options must be enabled first by tapping the build number seven times in About phone. Select your preferred codec, then reconnect the headphones.

On Windows

Codec selection on Windows depends on the Bluetooth driver and headphone software. Many setups allow switching through the sound device properties or the manufacturer’s app. If no option appears, the driver likely offers only one codec.

On iPhone and Mac

Apple does not provide a manual codec picker. The system chooses AAC automatically when the headphones support it, so the step here is confirming support rather than switching.

Step 5: Confirm the Result

After switching, play a lossless track you know well and listen for changes in detail and stability. Some Android phones show the active codec in the Bluetooth device details. If the codec reverts after reconnecting, the setting did not save, and you may need to repeat the change or update the device software.

Common Mistakes

  • Assuming a codec works because the headphones advertise it, without confirming the phone supports it too.
  • Using a long or low-quality cable for wired fallback, which can hide differences you would otherwise hear.
  • Forgetting to reconnect after a switch, since many devices only apply the new codec on a fresh connection.
  • Chasing the highest bitrate when a low-latency codec suits your use better, such as video or games.
  • Leaving developer options on indefinitely without need, which some owners prefer to avoid.
  • Bluetooth transmitter with codec support: Useful for adding codec options to a device that lacks them, such as a TV or older stereo. View on Amazon
  • USB Bluetooth adapter for PC: Adds codec choices to a desktop that lacks built-in support. View on Amazon

For deeper background, see Which Audio Codec Is Best for Bluetooth? AAC vs aptX (2026) and Trigger Bluetooth Audio Codec Selection: A Step-by-Step Guide (2026). If your codec menu is missing, Bluetooth Audio Codec Not Supported: 6 Fixes That Work covers common causes.

FAQ

Do I need the same codec on both devices?

You need a codec both devices support. Bluetooth automatically falls back to SBC if no better shared option exists, so the connection still works.

Is LDAC always better than AAC?

LDAC generally offers higher bitrate, but the audible difference depends on the headphones, the source file, and the environment. AAC is often sufficient for everyday listening.

Why does my codec change back after reconnecting?

Some devices reset to a default codec when a connection is rebuilt. Check the setting after each reconnection, and update the phone or driver software if the problem continues.

Conclusion

To select a Bluetooth audio codec, confirm the codecs your headphones and source device share, then choose based on whether you prioritize quality, low latency, or compatibility. Switch the setting in your device menu and reconnect to confirm it applied. Repeat the check whenever you change devices.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our headphone tech & types guides, checking product details against manufacturer specifications and owner feedback.