Updated November 2026
The oneplus 6t bluetooth codec is the compression method your phone uses to send audio to wireless headphones or earbuds. In this guide, you will learn how to check which codec is active, how to switch between the options your phone exposes, and how to confirm the change actually took effect. Most of the work happens in the developer options menu, so the steps below are straightforward.
What Codecs the Oneplus 6T Can Use
Codecs are the software that compresses and decodes audio over Bluetooth. The Oneplus 6T runs a version of Android, and Android has historically supported a core set of codecs. Your headphones also need to support a codec for it to be used, so the connection always lands on the best option both devices share.
Shopping for one? See our guide: OnePlus 5T Bluetooth Codec Review (2026): What You Should Know.
- SBC: the mandatory baseline codec. Every Bluetooth audio device supports it, but it has the lowest quality ceiling.
- AAC: common on Apple devices and many Android-compatible headphones, with better efficiency than SBC at the same bitrate.
- aptX and aptX HD: Qualcomm codecs that offer higher bitrates when both sides support them.
- LDAC: a higher-bitrate codec found on some Sony and other Android-friendly headphones.
Whether AAC, aptX, or LDAC appears on your phone depends on the software build and the headphones you pair. Check your exact model rather than assuming a codec is available.
How to Check the Active Codec
- Pair your headphones or earbuds with the phone and make sure audio is playing.
- Open Settings and go to About phone.
- Tap Build number seven times to enable Developer options.
- Go back to System, then open Developer options.
- Scroll to the Networking section and find Bluetooth Audio Codec. The currently selected codec is shown there.
Reading the Codec List
The menu lists every codec the phone can offer. Options your headphones do not support may appear grayed out or simply have no effect. The selected codec is the one actually in use after pairing.
How to Switch Codecs
Changing the codec is a quick process, but the connection may need a moment to renegotiate.
- In Developer options, tap Bluetooth Audio Codec.
- Select the codec you want, such as AAC, aptX, or LDAC.
- Turn Bluetooth off and back on, or disconnect and reconnect the headphones.
- Return to Developer options and confirm the selected codec now matches your choice.
Confirming the Change Worked
If the menu still shows the old codec after reconnecting, fully unpair the headphones and pair them again. Some headphones remember an older negotiated profile until you clear it.
Choosing the Right Codec for Your Listening
| Codec | Best for | Main limitation |
|---|---|---|
| SBC | Universal compatibility | Lower audio detail |
| AAC | Music and video on mixed devices | Quality varies by encoder |
| aptX | Better detail with compatible earbuds | Needs support on both ends |
| LDAC | High-resolution streaming | Higher battery use and possible dropouts |
For everyday streaming, AAC or aptX usually gives a clear step up from SBC. LDAC can sound best, but it may need a stable connection and more battery.
Common Mistakes
- Assuming the headphones support a codec because the phone lists it. Check the headphone specifications from the manufacturer.
- Changing the codec without reconnecting, then judging the sound on the old connection.
- Leaving Developer options set to a codec that causes stutter, then blaming the headphones.
- Expecting a codec change to fix poor audio caused by a worn cable or a weak source file.
Recommended Gear
- Bluetooth headphones with aptX support: useful if you want to test whether a higher-bitrate codec improves your listening. View on Amazon
- USB-C wired earphones: a useful backup when you need to rule out Bluetooth entirely. View on Amazon
FAQ
Why does my Oneplus 6T only show SBC?
Your headphones may not support other codecs, or the connection defaulted to SBC during pairing. Reconnect after selecting a different codec, and check the headphone specs if the option never appears.
Is AAC better than SBC on the Oneplus 6T?
AAC is generally more efficient than SBC at similar bitrates, so it often sounds cleaner. The real difference depends on your headphones and the encoder used.
Does changing the codec drain the battery faster?
Higher-bitrate codecs like LDAC can use more power than SBC or AAC. If battery life matters more than maximum detail, a lighter codec is the practical choice.
Conclusion
You can check the oneplus 6t bluetooth codec in Developer options and switch it in just a few taps. After changing it, reconnect the headphones and confirm the selection. Choose the codec that balances sound quality, stability, and battery use for how you listen.
