Updated November 2026
The Samsung S23 Ultra supports several Bluetooth audio codecs, and you can check which one is active and switch it in the phone’s developer settings. This guide shows you how to see the codec your headphones are using, how to change it, and what to expect from each option. The samsung s23 ultra bluetooth codec setting controls how audio is compressed before it reaches your earbuds, so it affects sound quality and sometimes latency.
Understand Which Codecs the S23 Ultra Works With
A codec is the method a phone uses to compress audio for wireless transmission. The S23 Ultra runs Android, and Samsung’s firmware typically exposes SBC and AAC as standard options, with LDAC available on many Galaxy models. Support for other codecs depends on both the phone and the headphones. Your headphones must also support a codec for it to be selectable, and the connection falls back to SBC when a shared codec is missing. For background on how these formats compare, see What's the Best Bluetooth Audio Codec? SBC vs AAC vs aptX vs LDAC.
Check the Active Codec
Before changing anything, confirm what your phone is currently using. Android hides this information by default, so you need to enable the developer options first.
- Open Settings and go to About phone, then Software information.
- Tap Build number seven times until you see a message confirming developer mode is enabled.
- Go back to Settings, open Developer options, and scroll to the Networking section.
- Look for Bluetooth Audio Codec. The selected codec appears in the field. If the menu is absent, search Developer options for “codec” because Samsung moves items between updates.
The active codec may not match your selection if the headphones don’t support it. In that case, the phone quietly uses SBC. For a broader walkthrough of this menu on Galaxy devices, read Bluetooth Audio Codec Samsung: How to Check and Switch Codecs on Galaxy Phones.
Switch to a Different Codec
Once you know what’s available, changing the codec takes a few taps.
- In Developer options, tap Bluetooth Audio Codec.
- Select the codec you want. Common choices are SBC, AAC, and LDAC.
- Disconnect and reconnect your headphones so the new codec negotiates correctly.
- Play a track and return to the codec menu to confirm the change stuck.
Choose Based on Your Priorities
| Codec | Best for | Trade-off |
|---|---|---|
| SBC | Maximum compatibility | Lowest fidelity of the common options |
| AAC | Apple devices and many Android headphones | Quality depends on the encoder |
| LDAC | Higher-resolution streaming | Needs a stable connection and headphones that support it |
If you are gaming or watching video, latency matters more than detail. Codecs that stream at higher bitrates can introduce a slight delay, so test with the content you use most. The guide on Low Latency Bluetooth Codec: How to Pick and Use One (2026) covers this trade-off in more depth.
Compare the S23 Ultra to Other Samsung Phones
Codec menus change between Galaxy generations, and the options on the S23 Ultra may differ from older or newer models. If you own a different Samsung phone, compare notes with Samsung S22 Ultra Bluetooth Codec Review: Features and Performance and Samsung S24 Bluetooth Codec Review: Features and Performance to see how the lineup has evolved.
Common Mistakes
- Selecting a codec without reconnecting the headphones, which leaves the old codec active.
- Assuming the phone is using LDAC because it is selected. Check the active codec after connecting.
- Expecting better sound from a high-bitrate codec on a weak connection, which can cause dropouts.
- Forgetting that some earbuds only support SBC and AAC, regardless of phone settings.
- Leaving Developer options changes in place when you no longer need them. You can turn developer mode off from the same menu.
Recommended Gear
- Headphones that list LDAC or aptX support in their specifications, so the codec menu has useful choices. View on Amazon
- A USB-C to 3.5mm adapter for testing wired audio when you need to rule out Bluetooth issues. View on Amazon
FAQ
Why does my S23 Ultra show SBC even when I selected LDAC?
The phone falls back to SBC when the headphones do not support the selected codec or when the connection is unstable. Check your headphone manual for supported codecs and reconnect after making changes.
Do I need to turn on developer options to change the codec?
Yes. On most Galaxy phones the codec menu sits inside Developer options, which must be unlocked by tapping Build number seven times.
Will changing the codec drain my battery faster?
Higher-bitrate codecs can use slightly more power, but the difference is usually small for everyday listening. If battery life is a concern, switch to a lighter codec and compare.
Conclusion
The samsung s23 ultra bluetooth codec setting is easy to check once developer options are open, and switching takes only a few taps. Always reconnect your headphones after a change and confirm the active codec. Pick the option that matches your headphones and your listening habits, whether that means maximum compatibility or higher fidelity.
